ElRobot

7+1 DoF robot arm.

$399 · Fully assembled pair

ElRobot in motion. Demo shows one leader with two followers; each pair includes one of each.Watch the full demo
Designed by NormaCore · Built by MakerMods

Straight to your first demo

An official NormaCore × MakerMods collaboration. A fully assembled leader–follower pair for teaching movements and recording demonstrations.

ElRobot clamped to a desk, with a wrist camera, printed frame and exposed servos.
Teach by hand

You lead. It follows.

Move the leader by hand and the follower mirrors it. Back-drivable servos keep the leader light to move. Both arms arrive assembled, paired and calibrated.

See what’s included
From movement to data

Record your demonstrations

Pick, place and repeat. Two included USB cameras capture the arm and the table, giving your demonstrations two viewpoints for imitation-learning research.

Explore the hardware

Teleoperated pick-and-place demonstration.

Open hardware

Open source

ElRobot is NormaCore’s open design, assembled by MakerMods. Print a spare, change a part or replace a servo. The CAD, print profiles, simulation files and assembly guides are public.

Explore the ElRobot files
Specs

The numbers

Configuration
One leader + one follower
Degrees of freedom
7 + 1Seven joints and a gripper
Reach
430 mm
Weight
Approx. 800 g per arm
Servos
16 × Feetech STS3215Eight serial-bus servos per arm
Follower
12 V servos · 30 kg·cm
Leader
7.4 V servos · back-drivable
Power
Two included suppliesFollower: 12 V / 4 A. Leader: 7.5 V / 5 A.
Connection
USB A-to-COne serial-bus driver per arm. Laptop required.
Vision
Two USB camerasArm-mounted and table views
Frame
3D-printed PLA
Build files
STL, STEP, URDF and 3MFNormaCore open hardware
In the box

Just bring your laptop

Both arms arrive wired, calibrated and tested, with the cameras and connections to start collecting demonstrations.

Follower arm
1 × assembled arm
Leader arm
1 × assembled arm
Servo drivers
2 × serial-bus drivers
Power supplies
2 × suppliesOne for each arm; no battery needed
Cameras
2 × USB camerasOne arm-mounted, one for the table
USB cables
2 × USB A-to-C
ElRobot · Fully assembled

Your next project starts here

$399

Buy the pair USD. Shipping calculated at checkout.
ElRobot clamped to a desk, with a wrist camera, printed frame and exposed servos.
  • Two arms, ready to connectOne leader and one follower, assembled and calibrated.
  • Cameras and connections includedTwo cameras, two power supplies, servo drivers and USB cables.
  • Made to be repairedPublic build files and standard, replaceable servos.

Building a classroom or a lab? Talk to Ryan and Isaac

Questions

Good questions

What is a leader–follower pair?

Two arms that work together. You move the leader by hand and the follower mirrors it. This lets you record demonstrations for imitation-learning research. Every $399 pair includes one leader and one follower.

Do I need to assemble anything?

Both arms arrive fully assembled, wired, calibrated and tested. Secure them to your bench, connect their power supplies and USB cables, and use your laptop for teleoperation and recording.

Are the cameras included?

Yes. You get two USB cameras: one arm-mounted and one for the table view. Both power supplies, both servo drivers and two USB A-to-C cables are included. Bring your own laptop.

Does it perform tasks on its own?

The demonstration clips show teleoperation: a person guides the leader and the follower mirrors it. Autonomous tasks require a trained policy and a software workflow for recording, training and running it.

Can I repair or modify it?

Yes. ElRobot uses standard Feetech STS3215 servos and a printed frame. NormaCore publishes the hardware files, print profiles and assembly guides so you can make spares and modify the design.

What does shipping cost?

Enter your delivery address at Shopify checkout to see shipping options and costs. For availability, delivery timing or a larger order, contact us.

Two teams. One open project.

What will you teach yours?

Meet the people behind ElRobot. Share your first demo, ask a question and build alongside both communities.

The design community

NormaCore

Explore the open hardware, share your modifications and talk robotics with the team that designed ElRobot.

Join NormaCore Discord
The maker community

Get help setting up your pair, meet fellow makers and share what you’re teaching your ElRobot.

Join MakerMods Discord